How is Plywood Made Step by Step

Sponsored Links :

How is Plywood Made Step by Step – This article is about How is Plywood Made Step by Step. In this article we are trying to provide you complete information about How is Plywood Made Step by Step. We have arranged the information in this post to make you understand it easily. We hope that you can understand it well. Please check the information below.

How is Plywood Made Step by Step

How is Plywood Made Step by Step

Plywood production requires a good log, called a peeler, which is generally straighter and larger in diameter than one required for processing into dimensioned lumber by a sawmill. The log is laid horizontally and rotated about its long axis while a long blade is pressed into it, causing a thin layer of wood to peel off (much as a continuous sheet of paper from a roll). An adjustable nosebar, which may be solid or a roller, is pressed against the log during rotation, to create a “gap” for veneer to pass through between the knife and the nosebar. The nosebar partly compresses the wood as it is peeled; it controls vibration of the peeling knife; and assists in keeping the veneer being peeled to an accurate thickness. In this way the log is peeled into sheets of veneer, which are then cut to the desired oversize dimensions, to allow it to shrink (depending on wood species) when dried. The sheets are then patched, graded, glued together and then baked in a press at a temperature of at least 140 °C (284 °F), and at a pressure of up to 1.9 MPa (280 psi) (but more commonly 200 psi) to form the plywood panel. The panel can then be patched, have minor surface defects such as splits or small knot holes filled, re-sized, sanded or otherwise refinished, depending on the market for which it is intended.

Sponsored Links :

Plywood for indoor use generally uses the less expensive urea-formaldehyde glue, which has limited water resistance, while outdoor and marine-grade plywood are designed to withstand moisture, and use a water resistant phenol-formaldehyde glue to prevent delamination and to retain strength in high humidity.

Anti-fungal additives such as Xyligen (Furmecyclox)may sometimes be added to the glueline to provide added resistance to fungal attack.

The adhesives used in plywood have become a point of concern. Both urea formaldehyde and phenol formaldehyde are carcinogenic in very high concentrations. As a result, many manufacturers are turning to low formaldehyde-emitting glue systems, denoted by an “E” rating (“E0” possessing the lowest formaldehyde emissions). Plywood produced to “E0” has effectively zero formaldehyde emissions.

In addition to the glues being brought to the forefront, the wood resources themselves are becoming the focus of manufacturers, due in part to energy conservation, as well as concern for natural resources. There are several certifications available to manufacturers who participate in these programs. Programme for the Endorsement of Forest Certification (PEFC) Forest Stewardship Council (FSC), Leadership in Energy and Environmental Design (LEED), Sustainable Forestry Initiative (SFI), and Greenguard are all certification programs that ensure that production and construction practices are sustainable. Many of these programs offer tax benefits to both the manufacturer and the end user.

So that is all about How is Plywood Made Step by Step. We think that it is good information about How is Plywood Made Step by Step. We hope that this information is useful for you. Please share if you think that this information can be useful for others. If you need more article related to How is Plywood Made Step by Step you can simply subscribe this blog. Thanks for visiting and have a nice browsing. source: https://en.wikipedi a.org/wi ki/Pl ywood

Leave a Reply