How to Store Aggregate on Site

Sponsored Links :

This article is about How to Store Aggregate on Site. In this article we are trying to provide you good information about How to Store Aggregate on Site. We have arranged the information in this post to make you understand it easily. We hope that you can understand it well. Please check the information below.

How to Store Aggregate on Site

how-to-store-aggregate-on-site

Sponsored Links :
  • Store aggregate at site on a hard dry and level patch of ground
  • If such a surface is not available then prepare a platform of planks or old corrugated iron sheets, or a floor of bricks, or a thin layer of lean concrete so as to prevent contamination with clay, dust, vegetable and other foreign matter.
  • Maintain sufficient distance between stacks of fine and coarse aggregates to prevent the material at the edges of the stock piles from getting intermixed.
  • If possible then construct dividing walls to give each type of aggregate its own compartment.
  • Stack the fine aggregate in such a place where loss due to effect of wind is minimum.
  • Stacking of the aggregates should be carried out in regular stacks. The suggested sizes for stacks are as follows.
MaterialSize of Stack (in m.)
LengthBreadthHeight
Soling stone520.5
510.5
Coarse aggregate220.5
551
510.5
Fine aggregate220.5
551
510.5

So that is all about How to Store Aggregate on Site. We think that it is good information about How to Store Aggregate on Site. We hope that this information is useful for you. Please share if you think that this information can be useful for others. If you need more article related to How to Store Aggregate on Site you can simply subscribe this blog. Thanks for visiting and have a nice browsing. source: civilblog.org

Leave a Reply