Index Properties of Soil

Sponsored Links :

Index Properties of Soil – This article is about Index Properties of Soil. In this article we are trying to provide you complete information about Index Properties of Soil. We have arranged the information in this post to make you understand it easily. We hope that you can understand it well. Please check the information below.

Index Properties of Soil

Index Properties of Soil are the properties of soil that help in identification and classification of soil. These properties are generally determined in the laboratory. In situ density and relative density require undisturbed sample extraction while other quantities can be determined from disturbed soil sampling.

Index Properties of Soil Chart

The soil properties on which their classification and identification are based are known as index properties. The index properties which are used are:

  • Grain Size Distribution.
  • Consistency Limits.
  • Plasticity Index.
  • Grain Size Distribution (Sieve Analysis).

The sieves are arranged, keeping the finest below and the coarser above it. A definite quantity of soil is dried in an electric oven (for 24 hrs at 105┬░C) and put in the top sieve. The cover is placed over the top sieve and a pan below the lowest sieve. Then the sieves are placed in the sieve shaker and are shacked for few minutes. The weight of soil thus retained on each sieve is determined and is converted into a percentage.

Sponsored Links :

Consistency of Soil

Consistency of soil is the physical state of soil with respect to moisture content present at that time. By consistency means the relative ease with which water can be deformed. Consistency is related to the fine grained soil.

Consistency Limits or Atterberg Limits

The moisture content at which the soil change from one state to another State is called consistency limits or Atterberg limits

There are four different states of soil:

  • Solid State.
  • Semi Solid State.
  • Plastic State.
  • Liquid State.

When water is added to the dry soil mass its change from solid state to liquid state passing through semi solid and plastic state. Atterberg identify some other limits which are most useful for engineering purpose.

  • Liquid Limit.
  • Plastic Limit.
  • Shrinkage Limit.

So that is all about Index Properties of Soil. We think that it is good information about Index Properties of Soil. We hope that this information is useful for you. Please share if you think that this information can be useful for others. If you need more article related to Index Properties of Soil you can simply subscribe this blog. Thanks for visiting and have a nice browsing. source: http://www.aboutcivil.org/ & http://civildigital.com/

Leave a Reply