New Zealand Rebar Designation

Sponsored Links :

This article is about New Zealand Rebar Designation. In this article we are trying to provide you complete information about New Zealand Rebar Designation. We have arranged the information in this post to make you understand it easily. We hope that you can understand it well. Please check the information below.

New Zealand Rebar Designation

New Zealand Rebar Designation

HD-16-300, T&B, EW

It means High strength (500 MPa) 16 mm diameter rebars spaced at 300 mm centers (center-to-center distance) on both the top and bottom face and in each way as well (i.e., longitudinal and transverse).

Sponsored Links :

3-D12

It means Three mild strength (300 MPa) 12 mm diameter rebars.

R8 Stirrups @ 225 MAX

It means D grade (300 MPa) smooth bar stirrups, spaced at 225 mm centres. By default in New Zealand practice all stirrups are normally interpreted as being full, closed, loops. This is a detailing requirement for concrete ductility in seismic zones; If a single strand of stirrup with a hook at each end was required, this would typically be both specified and illustrated.

So that is all about New Zealand Rebar Designation. We think that it is good information about New Zealand Rebar Designation. We hope that this information is useful for you. Please share if you think that this information can be useful for others. If you need more article related to New Zealand Rebar Designation you can simply subscribe this blog. Thanks for visiting and have a nice browsing.

Leave a Reply