Screw Piles: Definition, Installation, History and Benefits

Sponsored Links :

This article is about Screw Piles. In this article we are trying to provide you complete information about Screw Piles. We have arranged the information in this post to make you understand it easily. We hope that you can understand it well. Please check the information below.

What are Screw Piles ?

Screwpiles, sometimes referred to as screw piles and also called Helical piles, are a steel screw-in piling and ground anchoring system used for building deep foundations. Screwpiles are manufactured using varying sizes of tubular hollow sections for the pile or anchors shaft.

The pile shaft transfers a structure’s load into the pile. Helical steel plates are welded to the pile shaft in accordance with the intended ground conditions. Helices can be press-formed to a specified pitch or simply consist of flat plates welded at a specified pitch to the pile’s shaft. The number of helices, their diameters and position on the pile shaft as well as steel plate thickness are all determined by a combination of:

  • The combined structure design load requirement.
  • The geotechnical parameters.
  • Environmental corrosion parameters.
  • The minimum design life of the structure being supported or restrained.
  • Screw pile steel shaft sections are subjected to design parameters and building codes standards for the region of manufacture.

screw piles

Screw Piles Installation

Screw piles are wound into the ground much like a screw into wood. Screw piles are installed using various earthmoving equipment fitted with rotary hydraulic attachments. Machinery varies from skid-steer loaders to 5 tonne through 80 tonne excavators. Rotary hydraulic powerheads with torque capacities ranging from 5,000Nm to 500,000Nm are custom fitted using various boom configurations. Special drive attachments connect the screwpile to the machine. Correct installation techniques are paramount to meet engineered design load and settlement outcomes. Incorrect techniques are likely to result in poor overall pile performance.

Sponsored Links :

Screw Piles Development

Screw piles can be referred to as screw piles, steel screw-in foundations, screw piers, helical piles, helical anchors, screw anchors, screw foundations and helical piers. Screw piles were first described by the Irish civil engineer Alexander Mitchell in a paper in Civil Engineer’s and Architects Journal in 1848 – however, helical piles had been used for almost a decade by this point. Screw foundations first appeared in the 1800s as pile foundations for lighthouses, and were extensively used for piers in harbours. Between the 1850s through 1890s, more than 100 screw-pile lighthouses were erected on the east coast of the United States using screw piles. Made originally from cast or wrought iron, they had limited bearing and tension capacities. Modern screwpile load capacities are in excess of 2000 kN, (approx. 200 tonne). Large load capacity screwpiles may have various componentry such as flat half helices, Bisalloy cutting tips and helices, cap plates or re-bar interfaces for connection to various concrete or steel structures.

More recently, composite technology has been developed and patented for use in small screwpiles. Composites offer significant advantages over steel in small screwpile manufacture and installed performance.

Screw piles design is based on standard structural and geotechnical principles. Screwpile designers typically use their own design software which has been developed through field testing of differing compression pile and tension anchor configurations in various soil profiles. Corrosion is addressed based on extended field trials, combined with worldwide databases on steel in ground corrosion.

Screw Piles Benefits

Screw piles are still used extensively, and their usage has extended from lighthouses to rail, telecommunications, roads, and numerous other industries where fast installation is required, or building work takes place close to existing structures.

Most industries use screwpile foundations due to the cost efficiencies and – increasingly – the reduced environmental impact. ‘Screwing’ the foundations in the ground means that there is less soil displacement so excess soil does not need to be transported from the site, saving on transportation costs and reducing the carbon footprint of the project.

The main benefits of screwpile foundations include: shorter project times, ease of installation, ease of access, reduction of the carbon footprint, ease of removal when the foundations are no longer required, reduced risk to the workforce, and reduced costs.

They are also suitable for both tensile and compression loads, so they are also used for masts, signs, and retaining structures.

So that is all about Screw Piles. We think that it is good information about Screw Piles. We hope that this information is useful for you. Please share if you think that this information can be useful for others. If you need more article related to Screw Piles you can simply subscribe this blog. Thanks for visiting and have a nice browsing.
source: https://en. wikipedia .org /wiki/ Screwpiles.

Leave a Reply